Smart Technologies 600i3 - Manual (Page 75)

63 | CHAPTER 8 – REPLACING YOUR UF55/UF55W PROJECTOR LAMP
Replacing the Projector
WARNING
Two people are required to replace the projector.
To replace the projector
on the boom
1. Put the projector back on the boom by aligning the hooks with the slots on
the projector.
CAUTION
Hold the projector firmly when re-attaching it to the stationary boom
.
2. Secure the projector to the plate with the screw that you retained after you
removed the projector from the boom.
WARNING
Be sure to replace this screw. The projector can fall from the boom causing
injury or damage to the projector when this screw is not in place.
3. Replace your projector padlock (optional).