SnapGear 1.7.8 - Manual (Page 28)

LAN port quick setup
The following figure shows the LAN port quick setup:
Figure 2.3 LAN port quick setup
1. Enter the name for your SnapGear appliance on the LAN.
2. Select the method for setting the LAN port network address configuration (either
DHCP or manual).
3. If you select DHCP or Skip, the Next button will take you to the ISP Connection
configuration page.
4. If you select Manual, the Next button shows the Manual LAN Configuration
page where you must enter an IP address and a Subnet mask for the SnapGear
appliance’s LAN port.
Getting started
25