SnapGear 1.7.8 - Manual (Page 50)

Dial-in and log on to the remote SnapGear appliance by double-clicking the Connection
Name icon. You need to enter the Username and the Password that was set up for the
SnapGear appliance dial-in account as shown in the following figure:
Figure 4.7 Connect to dialogue box
Windows 2000
To configure a remote access connection on a Windows 2000 computer, click Start,
Settings, Network and Dial-up Connections and select Make New Connection.
The network connection wizard will guide you through setting up a remote access
connection:
Figure 4.8 Network connection wizard
Dial-in server configuration
47