SnapGear 1.7.8 - Manual (Page 45)

Dial-in user accounts
User accounts must be set up before remote users can dial-into the SnapGear appliance.
The following figure shows the Dial-in user account creation:
Dial-in server configuration
42
Figure 4.2 Dial-in user account creation
The field options in Add New Account are shown in the following table:
Field Description
Username Username for dial-in authentication only. The name is case-
sensitive (e.g. Jimsmith is different to jimsmith).
Password Password for the remote dial-in user.
Confirm Re-enter the password to confirm.
Domain If your network has a Windows NT server, you can attach a domain
name to your dial-in remote user accounts. This field is optional and
can be left blank.