Socket Mobile GFK0121E - Manual (Page 26)

3
3-6 GFK-0121E Hand-held Monitor User’s Guide – June 1994
Enabling/Disabling the Ability to Change the
Baud Rate of Devices on the Bus
The next configuration screen shows whether the
HHM is able to change the baud rate of bus
devices.
C H N G B L K B A U D
E N A B L E D
To change the current selection, press F2 (Toggle),
then press F3 (Enter).
Enabling/Disabling the Ability to Configure
Devices on the Bus
The next display shows whether the HHM is able
to change the other configurable features of bus
devices.
C H N G B L K C O N F I G
E N A B L E D
Enabling/Disabling the Ability to Force I/O
Circuits
The next display shows whether the HHM can be
used to force I/O circuits.
C I R C U I T F O R C I N G
E N A B L E D
To change the current selection, press F2 (Toggle),
then press F3 (enter).
Enabling/Disabling the Ability to Clear Faults
The next display shows whether the HHM can
clear faults on bus devices.
C L E A R B L K F A U L T S
E N A B L E D
To change the current selection, press F2 (Toggle)
then press F3 (Enter).