Socket Mobile GFK0121E - Manual (Page 61)

Index
Index-1
GFK-0121E
A
AC operation, 2-1
AC power required, 1-5 , 2-1
Accessories, 1-3
Active device, selecting on HHM, 4-6 , 5-2
, 5-4 , 5-8
Adapter
230VAC connector, 2-2
AC power, 2-1
Alarm diagnostic, 5-10
Analog blocks
Monitor block screen, 5-5
Monitor/Control Reference screens, 5-10
B
Battery pack, 1-3
charging, 2-1 , 2-3
operation, 2-3
replacing, 2-3
Baud rate, 1-5
configuring for bus devices, 4-4
configuring HHM to change for blocks,
3-6
error, 7-2
selecting after powering up HHM, 3-2
Block ID, configuring HHM to change for
blocks, 3-5
Block/Bus Status display
for Bus Controller, 5-3
for Genius block, Remote I/O Scanner,
or Field Processor, 5-2
Bracket, mounting, 2-7
Bus
displaying number of devices on, 5-3
dual
switching, 5-3
viewing presently active bus, 5-4
scan time, display, 5-3
status, 5-3
Bus controllers
Block/Bus Status display, 5-3
compatibility with HHM versions, 1-4
Bus Switching Module, compatibility with
HHM versions, 1-4
C
Case, 1-3
Catalog numbers
Genius blocks and HHM versions, 1-4
HHM, options, accessories, 1-5
Charger, 1-3
catalog number, 1-5
using, 2-1
COMM Error message, 3-7
Communications error, 7-2
Compatibility with other devices, 1-4
Configuration
for bus devices
copying, 4-6
Field Control modules, 4-8
Field Processor, 4-7
Genius blocks, 4-6
grounding required for offline config-
uration, 4-2
menus, 4-3
online or offline, 4-2
Program Block ID, 4-4
Remote I/O Scanner, 4-5
for permanently installed HHM, 2-6
sequence for HHM, 3-4
setting up HHM to configure bus de-
vices, 3-6
Configuration Protected error, 4-3 , 7-2
Connector, external
catalog number, 1-5
installation instructions, 2-9
Copy error, 7-2
CPU, host, configuring HHM for, 3-5
Current, display for PowerTRAC block,
5-11
D
D connector, 2-8
Data type, changing when monitoring re-
mote drop, 5-15
Description, 1-2
Device number
HHM, 3-4
of bus device, changing, 4-4
Diagnostics
displaying, 5-9