Sony RM-VL1000T - Manual (Page 12)

12
2
Select “CLOCK” by
pressing the Label Select
button.
The Commander enters clock
setting mode.
“CLOCK” and the current time
setting is displayed on the LCD
display.
The time mode (STD TIME or
DS TIME) currently set stays
lit, and the other flashes.
3
To change the time mode,
select the time mode which
flashes (STD TIME or DS
TIME) by pressing the
Label Select button.
If it is not necessary to change
the time mode, press the
Joystick toward or , and go
to Step 4.
SET
PRESET
LEARN
LABEL
CLOCK
Setting the Clock (continued)
4
Set the clock by pressing
the Joystick toward , ,
or . Follow Steps 4 - 6 on
pages 9-10.
5
Press the SET button.
SET
CLOCK
WED
10:00 AM
STD TIME
DS TIME
10:00 AM