Sony RM-VL1000T - Manual (Page 32)

32
Controlling the Volume of Visual
Components Connected to an
Audio System (continued)
COMPO
SET
VOLUME
AMP
R
R
R
VISUAL
The component names are
displayed on the labels. To
change the labels, press the
SCROLL button.
The components with a preset
code number beginning with
“4” (amplifier) flash.
7
Select the component of
which volume setting you
want to change (in this case,
AMP) by pressing the Label
Select button. (To change
the labels, press the
SCROLL button.)
With a beep sound, the volume
control setting of audio
components is switched to the
amplifier.
If you want to change the
volume setting of other
components, repeat Steps 6 and
7.
COMPO
SET
VOLUME
SAT2
VCR2
CD
AMP
AUDIO
COMPO
SET
VOLUME
AMP
R
R
R
AUDIO
5
Select the component of
which the volume setting
you want to change ( in this
case, AMP) by pressing the
Label Select button. (To
change the labels, press the
SCROLL button.)
With a beep sound, the volume
control setting of visual
components is switched to the
amplifier.
If you want to change the
volume setting of other
components, repeat Steps 4
and 5.
6
To change the volume
control setting of audio
components (AMP, CD,
MD/DAT, TAPE A and
TAPE B), select the
component set to audio (in
this case, AMP) by pressing
the Label Select button.
SET
VOLUME
VISUAL
AMP
AUDIO
AMP