Sony RM-VL1000T - Manual (Page 45)

45
5
Press the SET button.
The display returns to the
previous one.
To clear the Power-On command
Follow the same procedure as
Steps 1- 5 on pages 44- 45.
The selected component name
appears on the bottom of the LCD
display. A beep sound is heard,
and “OFF” lights.
Note
If the component code of a non-Sony
product has been set for a component
label, you cannot programme the
Power-On function for it.
The display of the component
names (preset by Sony) for
which you can programme the
Power-on signal flashes. The
display of the other
components stays lit.
4
Select the desired
component by pressing the
Label Select button.
(To change the labels, press the
SCROLL button repeatedly. )
The selected component name
appears at the bottom of the
LCD display.
A beep sound is heard, and
“ON” lights.
The display returns to Step 4.
If you select a component
for which the Power-on
signal cannot be
programmed
“NG” appears and the ‘NG’ sound
is heard twice. And the display
returns to Step 4.
SET
POWER ON
TV
SAT1
VCR1
DVD
SET
POWER ON
ON
DVD
SET
POWER ON
OFF
DVD