Sony RM-VL1000T - Manual (Page 30)

30
However, if your visual
components are connected to an
audio system, you probably hear
TV or VCR sound from the
loudspeakers via your amplifier,
not from your TV speakers. In this
case, you need to change the
factory preset so that you can
control the volume of your visual
components without first having
to switch to the amplifier.
To change the Factory Preset of
the Volume Control
Controlling the
Volume of Visual
Components
Connected to an
Audio System
The Commander is factory preset
based on the assumption that you
hear the sound of your visual
components from your TV
speakers, and that you hear sound
of your audio components from
the loudspeakers connected to
your amplifier.
This feature enables you to control
the volume of your TV or
amplifier without having to select
TV or AMP each time you want to
control the volume.
For example, to control the
volume while using a VCR, you
don’t need to press the TV button
to control the TV volume.
You can switch the volume of all
the visual components to the
amplifier at the same time.
The following table shows the
factory setting of which volume
would be controlled for each
component.
Advanced Features
Component
name on the
display
TV
VCR1
VCR2
VCR3
SAT1
SAT2
DVD
CD
AMP
MD/DAT
TAPE A
TAPE B
Controls the volume
of
TV
TV
TV
TV
TV
TV
TV
amplifier
amplifier
amplifier
amplifier
amplifier
COMPO
SYSTEM
TIMER
SCROLL
SET
REC
VIDEO1 VIDEO2 AUX
TUNER CD TAPE
MD TV
DVD
MENU
PROGR
GUIDE
PHONO
1- 2-
1,8
2
5,7
4
3,6