Sony RM-VL1000T - Manual (Page 70)

70
Specifications
Operating distance
Approx. 32.8 ft. (10 meters) (varies
depending on components of
different manufacturers)
Power requirements
Remote control and backlight: Two
size AA (R6) batteries
Battery life
Approx. 5 months (varies depending
on frequency of use)
Dimensions
Approx. 2 3 /
4
Ч
8 5 /
8
Ч
1 3 /
16
in.
(w
×
h
×
d)
(69
Ч
217
Ч
30 mm)
Mass
5.3 oz. (154 g) (not including batteries)
Learnable signals*
Capacity per signal: up to 300 bit
Signal frequency range: up to 156
kHz
Signal interval: up to 1 second
* Some signals cannot be learned by
the Commander, even though the
signals comply with these
specifications.
Design and specifications are subject to
change without notice.
The CE mark on the unit
is valid only for products
marketed in the
European Union.
Additional Information
Precautions
•Do not drop the unit or subject
the unit to shock as malfunction
may result.
•Do not leave the unit in a
location near heat sources, or in
a place subject to direct sunlight,
excessive dust or sand, moisture,
rain or mechanical shock.
•Do not put foreign objects into
the unit. Should any liquid or
solid object fall into the unit,
have it checked by qualified
personnel before operating the
unit any further.
•Do not expose the remote control
detectors of your components to
direct sunlight or other strong
illumination. Too much light in
such places can interfere with
remote control operations.
•Be sure to place the Commander
out of the reach of small children
or pets. Components such as air
conditioners, heaters, electric
appliances, and electric shutters
or curtains receiving an infrared
signal can be dangerous if
misused.
Maintenance
Clean the surface with a soft cloth
slightly moistened with water or a
mild detergent solution. Do not
use any type of solvent such as
alcohol, benzine or thinner as it
may damage the finish of the
surface.