Sony RM-VL1000T - Manual (Page 25)

25
To change the labels, press the
SCROLL button repeatedly.
Each time the SCROLL button
is pressed, the labels change as
follows.
Note on the flashing display
The labels that are already preset
for that component flash twice
while those that are not preset flash
once.
To change the name of the
Labels
Follow the procedure on page 27.
If you press the SET button
The display returns to the setting
learning mode.
ANT SW
PLAYx2
Q.TIMER
COUNTER
COMMERCL
SP/LP
EJECT
********
********
********
SEARCH t
SEARCH T
Continued
5
Select the label on the LCD
display by pressing the
Label Select button or press
the button on the
Commander you want to
“teach.”
“LEARN” flashes for 10 seconds,
and the Commander enters
receiving mode.
When teaching to a label on
the LCD
The selected label stays lit. Other
labels disappear.
When teaching to a button
on the Commander
The labels disappear.
6
Press and hold down the
button on the other remote
control until you hear a
beep.
(If you release the button
before you hear a beep, the
signal may not be learned
correctly.)
SET LEARN
LEARN
PLAYx2
VCR1