Stinger JPEG 2000 - Manual (Page 15)

Operation
4-6. Playback
In record mode or stop mode, press the [PLAY] button to play the recorded images in real time (1x speed).
For reverse playback, press [PLAY] button again to change direction of play.
Use the Jog/Shuttle to pause and control playback speed. To stop playback, press the [STOP] button.
Using Jog/Shuttle
Press the [J.SHUTTLE] button in playback mode. The [ACTIVE] LED will be lit, and Jog/Shuttle is ready for use. The
[RUN] LED will blink whenever you operate the Jog/Shuttle. To scan forwards, turn the Shuttle right and turn
Shuttle left to scan backwards.
Rotate inner Jog/Shuttle using your index figure to perform frame advance in forward or reverse directions.
Operation of Shuttle is as follows.
1/4x: 4 times slower than normal playback speed
1/2x: 2 times slower than normal playback speed
1x: Normal playback speed
2x: 2 times faster than normal playback speed
4x: 4 times faster than normal playback speed
16x: 16 times faster than normal playback speed
64x: 64 times faster than normal playback speed
If you want to maintain the playback speed selected using the outer Jog/Shuttle, hold the Jog/Shuttle at that
position for a few seconds, and the playback speed selected continues until you rotate the Jog/Shuttle again.
J.SHUTTLE
RUN
ACTIVE