Stinger JPEG 2000 - Manual (Page 26)

Setup
7. Password Setup
Use the [UP] and [DOWN] buttons to move to the correct option and the [LEFT] and [RIGHT] buttons to set user
ID.
The password must be consist of 1 to 8 digit numbers. Just use number buttons from 1 to 10 on the keyboard.
To change password, the user must input the correct old password and then input the new password. The new
password must then be re-confirmed.
Default value:
ADMIN : ‘ ‘ (Blank)
MANAGER : ‘1’
USER 1 : ‘2”
:
:
USER 8 : ‘9’
* Change the user PASSWORD in the first operation is recommended.
* To avoid forgetting the DVR PASSWORD, we recommend you write it down and store in a secure area..
8. System Information
DVR system information including firmware version, hardware version, product ID, etc...