Stinger JPEG 2000 - Manual (Page 22)

Setup
2. Colour:
Adjust image color.
Move to each element using [UP][DOWN] button and adjust
using [-] [+] button or Jog shuttle.
CHANNEL: Select camera
BRIGHTNESS: Adjust image brightness (-32~ 31)
CONTRAST: Adjust color contrast ( -32 ~ 31)
SATURATION: Adjust color saturation ( -32 ~ 31)
HUE: Adjust color hue ( -32 ~ 31)
3. Camera Active Setup:
With the direction button, move to the option to be changed,
and press the [ENTER] button to select [ON/OFF]. If it is set at
LIVE [OFF] and REC [ON], the DVR system records, but does
not show the live image of the selected camera on the live
display monitor.
STATUS: Shows if the image from a specific camera is
available for live display and recording. Normally the
camera condition is ACTIVE, but LOSS is displayed
when a camera is disconnected or not working.
LIVE: Decides whether to show LIVE screen image or not.
REC: Decides whether to record relevant camera or not.
5-3.4. Motion Setup:
You can set the sensitivity of motion detection in 4 steps, the
detection window number, motion detection area and other
parameters relating to the motion recording in this menu.
1. Motion Setup:
Sensitivity Grade: Adjusts motion detection sensitivity.
(LOW, MEDIUM, HIGH, VERY HIGH).
Motion Display Type: Showing cells with motion detected
differently from cells with no motion.
Record Duration: Whenever motion is detected and it is set
at Motion Recording mode, DVR system
records for RECORD DURATION from time
motion is detected. (1sec. ~ 99 sec.)
(Default duration: 5 sec.).