Stinger JPEG 2000 - Manual (Page 32)

Setup
5-6.2. RS-232C Setup
User can control the DVR via RS-232C port. Connect DVR to PC via
RS-232C port and control DVR using keyboard of PC. This function
is mainly for programmers who wants to control the DVR as part of
many devices connected to PC network.
5-6.3. PAN/TILT Setup
It is to set parameters for PTZ cameras connected to the DVRX unit. The DVR unit already includes all the
protocols of many well-known PTZ cameras such as PELCO D-type. After the user has selected the correct
MODEL and set the parameters to control his PTZ cameras, he can control them using the operation buttons on
the keyboard of the DVRX. If the PTZ camera protocols are not available in the PTZ list, the user must input the
parameters of the PTZ protocol himself. Using the USB firmware port, the user can upgrade protocol for new PTZ
cameras as they become available.
1. CHANNEL: Select channel
2. MODEL: Select camera model (protocol type) per each channel
3. PTZ ID: Select ID
4. BAUDRATE: Select data transmission speed
5. CMD DELAY: Select command delay time