Stinger JPEG 2000 User Manual
Page 45
Network Setting
How do I open an MS-DOS or Command Prompt?
Windows 98/Me: Start -> Programs -> Accessories -> MS-DOS prompt
Windows 2000/XP: Start -> (All) Programs -> Accessories -> Command Prompt
How do I choose a private IP address : Below lists the ranges for private addresses.
Private Class A address space: 10.0.0.0 – 10.255.255.255
Private Class B address space: 172.16.0.0 – 172.31.255.255
Private Class C address space: 192.168.0.0 – 192.168.255.255
For most cases you will choose a private IP address that falls in the Class C address space. (ex. 192.168.1.x or
192.168.0.x)
How do I forward a port in my router?
For cases A&C you must forward a TCP/IP port through your router. This port is the Port Number specified in the
DVR. For most cases you should be able to leave the default at 50000.
Every router has a different procedure for forwarding ports. Please consult your router’s user guide on how to
correctly configure Port Forwarding.
Can I configure my DVRX for remote access using a Dial-Up connection?
Yes, it is possible, but not recommended. With a live video feed, the bandwidth that a dial-up connection
provides is very poor. In addition, you will have to install a device that allows your DVR to connect directly to your
dial-up phone line.
Why is my remote video jerky?
The frame rates received via the Internet are all dependent on your connection condition and speed at both the
DVR site and the location from where you are accessing the DVR. The fastest frame rates are achieved locally.
Important Notes Regarding the Remote Viewer and the DVR
When you are in SCAN MODE and are playing back data, you are actually accessing the DVR remotely and
placing the unit itself in playback mode, which enables DVR to record the images.
When selecting a date/time to play back. First, ensure that the stop button has been pressed (screen should have
no images displayed). Next, select the date you wish to view and verify that it is a valid date on the hard drive and
that the selected data is outlined with the box filled in. Then, select the time you wish to access for that particular
date. Finally, hit the single-arrow play or double-arrow play button.
To see continuous live view, we recommend NOT setting the DVR for motion detection. The remote viewer only
sends images when there is motion and this motion is not fluid. The remote SCAN MODE option still operates as
normal. We recommend only using the remote playback feature if you set the DVR for Continuous Record.
The DVR still records images in the remote scan mode, but recording rates drop by a small amount. Therefore, we
recommend remote access to DVR for Scan when needed.
The remote viewer is only compatible with Windows operating systems. If the connection is lost during remote
playback, exit SCAN MODE, reconnect to the live view, then re-enter SCAN MODE.