Stinger JPEG 2000 - Manual (Page 29)

Setup
5.4.2. Schedule Setup
Unless you select an alternative recording mode, the DVR system records in Schedule Recording mode as default.
In SCHEDULE REC SETUP, you can set the type of recording for every time interval of 2 hours in each day.
Schedule Recording as set by the manufacturer is recording continuously at its full recording speed, this means
the DVR system records continuously at 100 ips at 720x240 resolution.
To change Schedule Recording parameters, enter the SYSTEM MENU-RECORD SETUP-SCHEDULE SETUP and
Press the [ENTER] button.
1. Schedule Setup
Set recording type for each recording time interval for each day of
the week (2 hours interval).
Use the [MODE] button to select the record mode type (A/M/C) and
move to the time interval of a day of the week you want to change.
Press the [ENTER] button to confirm and use the [+] or [-] buttons, to
change the record type. To move to the next page and continue
editing, use the [NEXT] button.
MODE (Edit type)
CELL BY CELL: Set each time interval of a day of the week
DAY OF THE WEEK: Set a day of the week at once
TIME SLOT: Set a time slot at once
ALL: Set page by page at once
CLEAR ALL: Clear page by page
Unless user press [REC] button to record at full resolution and in SUPER FINE picture quality, the DVR system
records in SCHEDULE Record mode by default.
DEFAULT record mode for each time interval of a day of the week set by the manufacturer is C (CONTINUOUS)
recording.
Record type:
After power on:
Schedule record
Exit from menu: Schedule record
End of search or playback: Schedule record
After pressing [STOP] button: Schedule record
After pressing [REC] button: Emergency record (Continuous recording in full performance) (60 (50) ips at
720x240 (720x288))