Stinger JPEG 2000 - Manual (Page 31)

Setup
5-6. External Device
To set parameters of external devices connected to the DVR, like
Ethernet, PTZ camera, RS-232C, etc.
Use the direction buttons to move to the sub-menu and Press the
[ENTER] button to select.
5-6.1. TCP/IP Setup
TCP/IP function enables user to see live pictures and recorded pictures via the internet.
1. IP CONFIG Setup:
Show the network information assigned to the DVR unit. If the DHCP setup status is AUTOMATIC, user can set
the IP port only and if the DHCP setup status is MANUAL, user must set all parameters.
2. Connection Setup:
TIME OUT: Adjust TIMEOUT value properly to successfully access to DVRX unit via an TCP/IP connection. If data
transmission speed is high enough, leave TIMEOUT value as set by manufacturer (200 msec), and
increase it if data transmission via TCP/IP GPRS connection is relatively slow. Execute tracert (Tracing
Route) in your PC for IP assigned to DVRX unit, and you can figure out how much to increase the
TIMEOUT value by.
RETRY COUNT: Set the retry number of times for network connection.