SLS Audio NEEK Board Support Package uClinux - Manual (Page 15)

uClinux NEEK BSP uClinux NEEK BSP Development Environment
2.2.2 IP Address Used
The table below lists the IP address and port used throughout this document. It
may be different for your system. Please check your network settings before
applying any IP address.
IP Address Description
192.168.0.14 Development Target IP address
192.168.0.26 Development Host and NFS server IP address
192.168.0.205 Getway IP Address
255.255.255.0 Getway Mask
9999 TCP port
2.3 Development Host
Refer to the Red Hat documentation for Red Hat Fedora 7.0 core installation and
host setup information.
2.3.1 Downloading and Unpacking uClinux NEEK BSP
To download the uClinux NEEK BSP package visit:
http://slscorp.com/pages/bspdownload.php .
Now, to unpack the BSP package, follow the steps mentioned below:
1. Copy the entire package in the home directory.
2. Apply su command to login as super user
#su
It will ask super user password for further process.
3. Issue
#cd /home
#tar jxfv uClinux.tar.bz2
4. Now go into uClinux directory using the following command
#cd /home/uClinux
And then
#tar jxfv uClinux-dist.tar.bz2
It starts extracting files and it may take some time.
5. Now, issue
System Level Solutions 7