SLS Audio NEEK Board Support Package uClinux - Manual (Page 19)

uClinux NEEK BSP uClinux NEEK BSP Development Environment
Figure 6 Libc Version Settings
3. Press Enter to select None.
4. Select <Exit>
5. Select <Exit>
6. You will be asked to save the kernel configuration. See Figure 7
Figure 7 : Save Option
7. Select <Yes> and press Enter.
You have now finished Kernel/Library/Defaults settings.
DO NOT change any other settings until first successful boot.
8. You will be backed to Linux Terminal.
2.4.2 Set System.ptf
Generate a system header file with the sls_neek_bsp_hw_sopc.ptf . This file is
located at “/home/uClinux/System-files” directory. You will be prompted to
select the hardware from the available list.
1. Type the following command and press Enter.
#make vendor_hwselect SYSPTF=/home/uClinux/
System-files/sls_neek_bsp_hw_sopc.ptf
You will be asked to select the CPU. See Figure 8
System Level Solutions 11