SLS Audio NEEK Board Support Package uClinux - Manual (Page 61)

uClinux NEEK BSP Debugging Kernel and User Applications
Booting uClinux on NEEK LCD
Download .sof and zImgae, you will see booting uClinux on NEEK LCD. When
the zImage is already up and running, plug PS/2 keyboard in PS/2 port. Now
execute the shell command as usual. You can execute all shell commands offered
by shell and can run various programs and utilities available in the zImage.
After successfully running the zImage, you will see the booting of uClinux on the
NEEK LCD. See
Figure 28 and Figure 29.
Figure 28 : Framebuffer Console View 1
System Level Solutions 53