SLS Audio NEEK Board Support Package uClinux - Manual (Page 56)

Demonstrations uClinux NEEK BSP
7. Select Welcome.mpg and click Play. The MPEG clip will get played on the
screen.
8. Repeat steps 6 to 7 to play JPEG and MP3 files
SLS uClinux Demo
The SLS uClinux demo is designed to run multiple applications on uClinux
platform. The application uses SLS GUI library and various SLS IP cores
including Ethernet Mac 10/100, TPC and VGA /LCD Controller.
To know how to run this demo, refer HowToRun.txt located at Demo/
NEEK_Application_Selector_Demos/Multiple_Processing.
Follow the steps mentioned below to run the SLS uClinux demo.
1. Power on the board by pressing the switch SW1. You will see the Application
selector menu on the LCD Touch Screen Display.
2. In the application selector main menu, touch the SLS uClinux Demo to select
it.
3. Touch the Load button located on the bottom left corner of the Touch Screen
to load the SLS uClinux demo application. You will see the Figure 22
Figure 22 : Loading SLS uClinux Demo
4. The SLS uClinux Main menu displays as shown in
Figure 23 below.
48 System Level Solutions