SLS Audio NEEK Board Support Package uClinux - Manual (Page 33)

uClinux NEEK BSP Configuring Device Drivers and File Systems
4.10 JTAG UART Driver
To include the JTAG UART Driver in compilation, the following options should
be enabled:
Serial support --->
[*] Altera UART support
(4) Maximum number of Altera uart ports
(115200) Default baudrate for Altera UART
ports
Device Drivers --->
Character devices --->
Serial support --->
[*] Altera JTAG UART support
[*] Altera JTAG UART console support
Device Drivers --->
Character devices --->
If you want to bypass the JTAG, then select the following options.
[*] Bypass output when no connection
Device Drivers --->
Character devices --->
Serial support --->
[*] Altera JTAG UART support
[*] Altera JTAG UART console support
System Level Solutions 25