Sony PDW-V1 - Manual (Page 45)

45
5-1 Overview
Chapter
5
Scene Selection
5-1 Overview
Clip lists and sub clips
Scene selection is a function which allows you to save,
load, and edit clip lists consisting of clips recorded on disc,
or parts of clips, arranged in any order. Clips or parts of
clips which have been inserted into clip lists are called sub
clips.
Clip lists on disc and the current clip list
Up to 99 clip lists can be saved on disc. These clip lists can
be loaded, one at a time, into the unit’s memory for
playback and editing. Newly created clip lists are also
saved in the unit’s memory.
This manual refers to the clip list which is currently loaded
into the unit’s memory as the “current clip list.”
The current clip list is always the target of sub clip creation
and editing.
Notes
• Data in the unit’s memory is lost when a disc is ejected
or the unit is powered off. After creating or editing the
current clip list, be sure to save it to disc.
• The current clip list cannot be saved to disc when the
disc’s write-protect tab is set to the recording disabled
position.
Clips recorded on disc
Clip 1 Clip 2 Clip 3 Clip 4
Clip list example
Clip 2 Part of clip 4 Part of
clip 3
Sub clip 1 Sub clip 2 Sub clip 3
Disc
Unit’s memory
Current clip list
Can be edited (adding and
deleting, rearranging sub
clips)
cClip list playback
and thumbnail
display
SAVE m M LOAD
E0001 (Clip list 1)
E0002 (Clip list 2)
E0003 (Clip list 3)
:
:
E0099 (Clip list 99)