Sony PDW-V1 - Manual (Page 68)

Cha
p
te
r 7
Men
u
s
68
7-2 Basic Setup Menu
011 CHARACTER V-SIZE Determine the vertical size of characters such as time code output from the
VIDEO OUT connector and SDI OUT connector for superimposed display on the
monitor.
:Standard size
×2 :2 times standard size
When setting this item, watch the monitor screen, and adjust to the required state.
012 CONDITION DISPLAY ON
VIDEO MONITOR Select whether to display disc condition marks in the image display and external
monitor output (output from the VIDEO OUT and SDI OUT connectors).
dis: Do not display (disable).
ena: Display (enable).
013 525/625 SYSTEM SELECT Specify whether to enable switching between 525(U)-line, 525(J)-line and 625-line
modes.
off: Do not enable system switching.
on: Enable system switching.
For the switching between 525(U)/525(J)/625-line modes, see page 70.
Note
When you switch line modes, all basic menu and extended menu items are set to
the factory defaults for the selected line mode.
016 ALARM DISPLAY Select whether or not to display alarm messages.
off: Do not display alarm messages. (However, certain important alarms are
displayed).
limit: Display only a minimum number of alarm messages.
on: Display all alarm messages.
For details about alarm message display conditions, see 8-3-1 “Alarm List” (page
87).
017 SUB STATUS DISPLAY
SELECT Determine the kind of sub status information to be output from the VIDEO OUT
connector and SDI OUT connector.
off: Do not output sub status information.
clip: Selected clip number/total number of clips
Note
When the CHARACTER button setting is for no superimposing text information,
sub status information is not displayed when this item is set to “clip name.”
024 MENU CHARACTER
TYPE Determine the type of characters in menu text output from the VIDEO OUT
connector and SDI OUT connector for superimposed display on the monitor.
white: White letters on a black background.
black: Black letters on a white background.
W/out: White letters with black outline.
B/out: Black letters with white outline.
When setting this item, watch the monitor screen, and adjust to the required state.
029 STORED OWNERSHIP Specify whether to enable changing UMID ownership information settings
(COUNTRY, ORGANIZATION and USER).
off: Do not enable.
on: Enable.
See 7-3-3 “Using UMID Data” (page 77) for more information about UMID.
031 RECORDING FORMAT Select the recording format.
IMX50: MPEG IMX 50
IMX40: MPEG IMX 40
IMX30: MPEG IMX 30
DVCAM: DVCAM
032 LCD MONITOR MODE Set the aspect ratio for the image display.
auto: the aspect ratio of the display screen automatically adjusts to the aspect
ratio of the input material.
16:9: set the aspect ratio to 16:9.
4:3: set the aspect ratio to 4:3.
Item number Item name Settings
Ч1