Sony PDW-V1 - Manual (Page 90)

Chap
ter
8
Maint
ena
nc
e and
T
roub
les
h
o
o
ting
90
8-3 Alarms
No Clip! limit A playback or search button was pressed
for a disc containing no recorded clips. These operations are not possible.
No Clip! off An attempt was made to delete a clip
from a disc containing no recorded clips.
Disc Top! limit The PREV button was pressed while
stopped at the top of the disc, or an
attempt was made to perform a high-
speed reverse search.
Disc End! limit The NEXT button was pressed while
stopped at the end of the disc, or an
attempt was made to perform a high-
speed forward search.
MAX# SB CLP off An attempt was made to add a sub clip
when the number of registered sub clips
had already reached the upper limit
(300) of the specifications of this unit. These operations are not possible.
CL OVER DUR off An attempt was made to add a sub clip
when the total duration of sub clips in the
clip list had already reached the upper
limit (24 hours) of the specifications of
this unit.
Run Salvage off A recording, E-E display, record an
essence mark, or add a quick scene
selection sub clip was attempted on a
disc which requires clip recovery
(salvage). Try the operation again after executing
the salvage function.
For details, see 3-6-7 “Using the Salvage
Function” (page 38).
No SEL List limit The SUBCLIP button was pressed
without loading a clip list from the disc
into the current clip list. Try the operation again after loading a
clip list.
For details, see 5-3-3 “Loading a Clip List
From Disc Into the Current Clip List”
(page 52).
No SUB Clip limit A button in the playback control section
was pressed when there were no sub
clips in the current clip list. Playback is not possible without a sub
clip in the current clip list.
SB CLP mode limit The SHIFT button and the THUMBNAIL
button were pressed together with the
SUBCLIP button lit. Press the SUBCLIP button, turning it off,
and try the operation again.
SUB CLIP NG limit The SHIFT and SET buttons were
pressed together when IN and OUT
points were not set correctly (the OUT
point was set before the IN point, etc.). Set the IN and OUT points correctly and
try the operation again.
No List! off An attempt was made to delete a clip list
with no clip lists saved on the disc. This operation is not possible.
STOP ONCE! limit The SUBCLIP button was pressed
during playback of a clip list. Try the operation again after stopping
playback.
STOP ONCE! off An attempt was made to display the
CLIP menu during playback.
No EM Space off Recording of an essence mark failed
because the number of essence marks
recorded on the disc reached the upper
limit of the specifications of this unit. Use the PDZ-1 Proxy Browsing Software
to delete unneeded essence marks.
EM Full! off An attempt was made to add an essence
mark with the number of recorded
essence marks at the upper limit of the
specifications of this unit.
Message in time
data display Display
condition
a)
Description Action