Sony PDW-V1 - Manual (Page 91)

Ch
apt
er 8
Mai
n
te
nan
c
e
a
nd T
ro
u
b
les
hoo
tin
g
91
8-3 Alarms
a) With respect to setting of basic menu item 016
During reception of commands from an external device connected to the REMOTE connector
a) With respect to setting of basic menu item 016
Alarms relating to sensors and drives
Formatting! off An attempt was made to display the
DISC MENU page in the system menu
during an auto format. Wait until the end of the auto format.
Disc Damage off An attempt was made to record, display
an E-E picture, record an essence mark,
or add a quick scene selection sub clip
when there was no free sparing area. This disc cannot be recorded. Exchange
the disc.
Non AV Full off An attempt was made to record, display
an E-E picture, record an essence mark,
or add a quick scene selection sub clip
when there was no free Non-Real-Time
space. Insert a different disc with enough free
capacity.
Message in time
data display Display
condition
a)
Description Action
Message in time
data display Display
condition
a)
Description Action
MAX# SB CLP off A command was received to add a sub
clip when the number of registered sub
clips had already reached the upper limit
(300) of the specifications of this unit. These operations are not possible.
CL OVER DUR off A command was received to add a sub
clip when the total duration of sub clips in
the clip list had already reached the
upper limit (24 hours) of the
specifications of this unit.
Non AV Full off A command was received to record,
display an E-E picture, record an
essence mark, or add a quick scene
selection sub clip when there was no free
Non-Real-Time space. Insert a different disc with enough free
capacity.
No Disc! on A recording, playback, search, or other
command was received with no disc
loaded. Try the operation again after loading a
disc.
No Clip! limit A playback or search command was
received for a disc containing no
recorded clips. These operations are not possible.
Disc Top! limit A PREV or reverse high-speed search
command was received with the disc
stopped at the top.
Disc End! limit A NEXT or forward high-speed search
command was received with the disc
stopped at the end.
Message in time
data display Display
condition
a)
Description Action
HUMID! off Condensation was detected in the unit. See 8-4 “Condensation” (page 93).