Sony PDW-V1 - Manual (Page 47)

Chapt
er
5
S
c
ene
Se
lec
tion
47
5-2 Basic Operations
To move the cursor within the scene selection
window
When the scene selection window appears as you carry
out step 3, use the left and right arrow buttons to move
in the desired direction.
6
When you have added all of the desired clips, save the
current clip list to disc.
For details, see 5-3-2 “Saving the Current Clip List to
Disc” (page 51).
Note
Unless the current clip list has been saved to disc, its
contents will be lost when a disc is ejected or the unit
is powered off. After creating a clip list, be sure to save
it.
Creating a sub clip from a full-screen
display clip, and including it in the clip list
(Quick scene selection)
To create any sub clip from a full-screen display clip, and
include it in the clip list, proceed as follows.
1
With the SUBCLIP button off, and the clip shown in
the full-screen display, carry out playback and search
to find the point you want to be the IN point of the sub
clip.
2
At the point you want to be the IN point of the sub clip,
hold down the
G/IN button and press the SET button.
This sets the IN point, and the IN indicator lights.
3
In the same way, find the point you want to be the
OUT point of the sub clip, hold down the
g/OUT
button and press the SET button.
This sets the OUT point, and the OUT indicator lights.
When you set IN and OUT points across several
clips
The number of sub clips created equals the number of
clips from the IN point to the OUT point. (See
following figure.)
To check the duration
Press the
G/IN button and g/OUT button together. The
duration appears on the screen.
To reset the IN point or OUT point, hold down the
G/IN button or the g/OUT button and press the
RESET button.
4
Hold down the SHIFT button, and press the SET
button.
This adds the segment from the IN point to the OUT
point to the end of the clip list as a sub clip.
5
Repeat steps 1 to 4 until all required sub clips have
been created and added to the clip list.
To preview a clip list while it is being created
Press the SUBCLIP button, turning it on, and then
press the PLAY button.
Playback begins from the first sub clip.
6
Save the current clip list to disc.
For details, see 5-3-2 “Saving the Current Clip List to
Disc” (page 51).
Note
Unless the current clip list has been saved to disc, its
contents will be lost when a disc is ejected or the unit
is powered off. After creating a clip list, be sure to save
it.
Thumbnails of the sub clips already included in the clip list
Total duration of the sub clips in the clip list
Cursor
(Insertion position for the
next sub clip to be included)
Clips recorded on disc
Clip 1 Clip 2 Clip 3
IN point OUT point
Sub clip 1 Sub clip 2 Sub clip 3