Sanyo SCP-2400 - Manual (Page 100)

Making a 10-4 Call (1-to-1 Call)
You can place a 1-to-1 10-4 call by selecting a contact from the
10-4 List.
1. Press (left softkey) or press to access the 10-4 List.
2. Press (left softkey), select the list from which you want
to place a call (Company List, Personal List, Outgoing, Incoming,
or Missed).
Tip: You can also select Enter 10-4# from Go to option to enter a 10-4
number directly. See page 93 for details.
3. Highlight the contact you want to call, and press and hold
to place the call and get the floor. (You will see
10-4 calling... and Connecting... followed by “You have floor.” You
can now begin speaking.)
– or –
Highlight the contact you want to call and press and release
to place the call. (The call will connect as described
above, but “Floor is open.” will appear on the screen and either
you or your contact may press and hold
to take the floor
and speak.)
Note: During a 10-4 call, the “ floor ” is the right to speak. When you see
“ Floor is open. ,” the first person to press the 10-4 button ( ) can speak
(while holding the button). Only the person who has the floor can speak.
The phone beeps if you press the 10-4 button when another contact has
the floor.
4. Continue holding as you speak. When you are finished
speaking, release the 10-4 button to allow other contacts to
speak. (When the other party takes the floor, you will see the
speaker’s name and phone number and the text “has floor.”)
5. When you are finished, press .
Note: When neither party has the floor during a 10-4 call, “ Floor is open. ”
appears on the display. If no one takes the floor for 20 seconds, the 10-4
call ends automatically.
Tip: If you press or during step 3 above, you can make a
standard voice call.
Go to
10-4
92