Sanyo SCP-2400 - Manual (Page 16)

Using the Battery
Installing the Battery
1. Insert the battery into the opening on the back of the phone
and gently press down.
2. Place the battery cover into the position as indicated in the
diagram, and then slide it until you hear it snap into place.
Removing the Battery
Warning! Do not handle a damaged or leaking Li-Ion battery as you can
be burned.
1. Make sure the power is off so that you don’t lose any stored
numbers or messages. Press the battery release latch, and
then slide the battery cover and remove it.
2. Use your thumbnail to lift and then remove the battery as
indicated in the diagram.
8