Sanyo SCP-2400 - Manual (Page 57)

Headset Mode
This feature allows you hands-free phone use. Set the headset
mode to Voice Call and press the Turbo Button (the operation
button) on the headset to activate useful functions.
To connect the headset:
ᮣ Simply plug the headset into your phone’s headset jack.
To set headset mode:
1. Press to access the main menu.
2. Select Settings.
3. Select Others.
4. Select Headset Mode.
5. Select Voice Calls, 10-4 or Off.
With the headset:
ᮣ Voice Calls: Press the Turbo Button to activate Voice Dial. Press
twice to redial the last call. Press and hold the button to
record the Voice Memo.
ᮣ 10-4: Press and hold the Turbo Button to redial the last 10-4 call.
Note: If your headset doesn’t have a Turbo Button, set headset mode to Off.
Note: A high volume setting may cause the audio to deteriorate or “crack.”
49