Sanyo SCP-2400 - Manual (Page 27)

End-of-Call Options
To display the following options, press (right softkey)
within 10 seconds after disconnecting a call.
ᮣ Call Again to dial the phone number.
ᮣ Call:Speaker On to dial the phone number in speakerphone
mode.
ᮣ Save Phone# to save the phone number in your Contacts list.
Go to Phone Book appears when the number is already in your
Contacts list. (See “Saving a Phone Number” below.)
Note: The End-of-Call options are not displayed for calls identified as
No ID or Restricted.
Saving a Phone Number
Your phone can store up to seven phone numbers in each of
300 Contact entries with up to 500 total numbers. Each entry’s
name can contain 16 characters. Your phone automatically sorts
the Contacts alphabetically.
1. Enter a phone number.
2. Press (right softkey).
3. Select Save Phone#.
4. Select a label.
5. Enter a name and press .
If you already have an entry stored in the Contacts list, you are
prompted to select the following entry modes:
ᮣ New Name to enter a new name.
ᮣ From Ph. Book to select a name from the Contacts entry list.
6. Press (left softkey).
7. Press (left softkey) to return to standby mode. Done
Save
Options
Options
19