Sanyo SCP-2400 - Manual (Page 101)

Making a 10-4 Call (Group Call)
You can make a 10-4 call to all members in a Group entry, which
you have in your 10-4 List. You can communicate with up to five
members at a time.
1. Press (left softkey) or press to access the 10-4 List.
2. Press (left softkey), select the list from which you want
to make a Group call (Company Groups or Personal Groups).
3. Highlight the group you want to call, and press and hold
to place the call and take the floor. (You will see
10-4 calling... and Connecting... followed by “You have floor.”
Continue with the 10-4 call as described previously.)
ᮣ To make a 10-4 call to a group member, select your desired
group, highlight your desired group member, and press and
hold .
ᮣ If one of the group members takes the floor, you will see the
member’s name and 10-4 number on the display. The phone
beeps if you press 10-4 button when another contact has the
floor.
4. When the call is finished, press .
Making a 10-4 Call by Entering a Number
1. From standby mode, enter the 10-4 number you want to dial.
2. Press to place the 10-4 call.
3. Continue with the 10-4 call, pressing and holding to
speak and releasing it to allow others to reply.
4. When the call is finished, press .
– or –
1. Press (left softkey) or press to access the 10-4 List.
2. Press (left softkey), select Enter 10-4#.
3. Enter the 10-4 number you want to dial.
4. Follow steps 2-4 above.
Go to
10-4
Go to
10-4
93