Sanyo SCP-2400 - Manual (Page 110)

Setting Speed Dialing for 10-4 Entries
1. Press to access the main menu.
2. Select Contacts.
3. Select Speed Dial #s.
4. Select an unassigned number.
5. Press (left softkey), select the list from which you want
to set a speed dial (Phone Book, Company List, Company Groups,
Personal List, or Personal Groups).
6. Select the contact.
– or –
Select the group, and select an option.
ᮣ Set as to assign the selected group as a speed dial.
ᮣ Details to display the group details. You can select the group
member from the group list.
To use Speed Dial for a 10-4 entry:
ᮣ From standby mode, press the appropriate key and press .
Setting 10-4 Guard
This feature enables you to display the warning message when
you cannot receive 10-4 calls. The warning message appears
when you are launching the Web.
1. Press to access the main menu.
2. Select Settings.
3. Select 10-4.
4. Select 10-4 Guard. (A message will appear.)
5. Press (left softkey) to continue.
6. Select On to activate 10-4 Guard. (Select Off to deactivate this
feature.)
OK
Go to
102