Sanyo SCP-2400 - Manual (Page 45)

Setting Return to Standby Mode
1. Press to access the main menu.
2. Select Settings.
3. Select Display.
4. Select Return to Idle.
5. A message appears. Press (left softkey) to continue.
6. Select Automatically or End Key.
ᮣ Automatically to return to standby mode automatically in 30
seconds.
ᮣ End Key to return to standby mode by pressing .
Note: End Key setting affects the battery’s talk and standby times.
Sleep Mode
This feature helps conserve your battery power by restricting
the display.
1. Press to access the main menu.
2. Select Settings.
3. Select Display.
4. Select Sleep Mode.
5. Select your desired option.
ᮣ To deactivate this feature, select Off during step 5 above.
OK
37