Sanyo SCP-2400 - Manual (Page 95)

Setting Up Screen Call
This feature enables you to answer incoming calls by using pre-
recorded announcements, either one that is pre-recorded or one
that you record.
Activating Screen Call
To start Screen Call when you have incoming calls:
1. When the phone rings or vibrates, press (right
softkey) to display the options.
2. Select Screen Call.
To set Auto Screen Call:
1. Press to access the main menu.
2. Select Voice Services.
3. Select Screen Call.
4. Select Auto.
5. Select On.
ᮣ If you want to change the answer time, enter your desired
number by using numeric keys or pressing the navigation key
up or down.
6. Press or (left softkey). The icon is displayed on the
Standby display.
Tip: If a new caller’s message is waiting, appears on the display. The
memos recorded while activating “Screen Call” are shown with the or
icon in the list. ( : once played, : not played yet)
Tip: While the caller is recording: Pressing stops recording and
disconnects the call. Pressing answers the call.
OK
Options
87