Konica Minolta bizhub 160f - Manual (Page 102)

4 Making copies
4-4 bizhub 160f
4
Specify the image density.
For details, refer to “Image Density”
on page 4-12.
5
Using the 10-key pad, enter the
number of copies to be made. Any
number from 1 to 99 can be entered.
6
Press the [Start] key.
This will start the copy cycle.
– To stop the copy cycle in mid-op-
eration, press the [Stop] key.
– To cancel the copy job, press the
[No/C] key or the [Panel reset]
key.
– To restart the copy cycle, press
the [Start] key.