Specifying tone/pulse, To specify the telephone dialing system – Konica Minolta bizhub 160f User Manual
Page 235
Advertising
Using the utility mode
7
bizhub 160f
7-71
Specifying TONE/PULSE
There are two types of telephone dialing systems: tone dialing (PB) and pulse
dialing (DP10pps or DP20pps). Faxes cannot be sent if this machine is not
set to the system used by your telephone line. Select the correct setting after
checking which type of dialing system is used.
To specify the telephone dialing system
1
Select the
TONE/PULSE
in the
COMM. SETTING menu.
For details, refer to page 7-70.
2
Using the [*] and [)] keys, select ei-
ther
TONE
(for tone dialing) or
PULSE
(for pulse dialing), and then
press the [Yes] key.
3
If
PULSE
was selected, select either
10pps
or
20pps
, and then press the
[Yes] key.
The COMM.SETTING menu appears
again.
Advertising