Konica Minolta bizhub 160f - Manual (Page 268)

8 When a message appears
8-24 bizhub 160f
8.7 When the message PAPER SIZE ERROR appears
PAPER SIZE ERROR message
If the paper size specified for a paper tray differs from the size of the paper
loaded in the tray, the message shown below appears when paper is fed
from that tray.
Check the message for the paper tray and the paper size to be fed, and pa-
per according to the corresponding procedure described below.
Paper size error for tray 1
1
Select TRAY1 PAPER .
For details, refer to “Paper source settings” on page 7-13.
2
Press the [1] key of the 10-key pad,
and then specify the correct paper
size and type.
For details, refer to “Specifying
TRAY1 PAPER” on page 7-14.
A5 A5 B5 B5 A4 A4