Konica Minolta bizhub 160f - Manual (Page 122)

5 Faxing
5-8 bizhub 160f
To fax using chain dialing
Faxes can be sent to recipients that are specified using any combination of
one-touch dial keys, speed dial numbers, direct input using the 10-key pad,
and the [Redial] key.
As an example, the following procedure describes how to specify recipients
using one-touch keys, then using the 10-key pad.
1
Load the document into the automatic document feeder.
2
Press the [Speaker] key.
3
Press the desired one-touch key,
and then press the [Start] key.
4
After the message PRESS START
KEY appears, use the 10-Key Pad to
enter the recipient’s fax number.
5
Press the [Start] key.