Konica Minolta bizhub 160f - Manual (Page 150)

6 Fax transmission/Reception methods
6-16 bizhub 160f
6.1.8 Relay initiation transmission
Documents can be sent from this machine (transmitting station) to another
fax machine (acting as a relay station), which then sends the documents to
multiple recipients (receiving stations). By relaying the documents through a
fax machine closer to the remote recipients, the transmission time and cost
for the transmitting station are reduced.
In order to fax using relay initiation transmission, a relay box must first be
programmed at the relay station.
2
Note
Relay initiation transmission is compatible with F code transmission.
Only machines that are compatible with relay broadcast transmission
should be specified as relay stations. This machine can be specified as a
relay station.
Relay initiation transmission and mailbox transmission cannot be per-
formed at the same time.
In order to fax using relay initiation transmission, a relay box ID must first
be programmed at the relay station (p. 7-49).
To fax using relay initiation transmission
1
Position the document.
2
If necessary, change the resolution setting (p. 5-14).
3
Press the [Function] key.
4
Press the [7] key from the 10-key
pad.
or
Press the [Function] key 7 times to
select
RELAY INITIATE , and then
press the [Yes] key.