Konica Minolta bizhub 160f - Manual (Page 248)

8 When a message appears
8-4 bizhub 160f
Loading paper into tray 1
1
Remove the bypass tray.
2
Load the paper in the tray so that the
front side of the paper (the side fac-
ing up when the package was un-
wrapped) faces up.
3
Attach the bypass tray in its original
position.
Loading paper into the bypass tray
The bypass tray can be loaded with a maximum of 1 envelope, 1 OHP trans-
parency, 1 card, or 10 sheets of plain paper.
% Load the paper so that the front side
of the paper (the side facing up when
the package was unwrapped) faces
up.