Specifying default tx, Specifying header, Specifying default tx -60 specifying header -60 – Konica Minolta bizhub 160f User Manual
Page 224
Advertising
7
Using the utility mode
7-60
bizhub 160f
Specifying DEFAULT TX
1
Select the
DEFAULT TX
in the TX
OPERATION menu.
For details, refer to page 7-58.
2
Using the [*] and [)] keys, select ei-
ther
MEM.TX
or
ADF TX
, and then
press the [Yes] key.
The TX OPERATION menu appears
again.
Specifying HEADER
1
Select the
HEADER
in the TX OPER-
ATION menu.
For details, refer to page 7-58.
2
Using the [*] and [)] keys, select ei-
ther
ON
or
OFF
, and then press the
[Yes] key.
The TX OPERATION menu appears
again.
Advertising