Konica Minolta bizhub 160f - Manual (Page 231)

Using the utility mode 7
bizhub 160f 7-67
Specifying FORWARD
1
Select the FORWARD in the RX OP-
ERATION menu.
For details, refer to page 7-63.
2
Using the [*] and [)] keys, select
ON , ON(PRINT) or OFF , and then
press the [Yes] key.
– If ON or ON(PRINT) was select-
ed, a screen appears, allowing you to specify the forwarding loca-
tion. (Continue with step 4.)
– If OFF was selected, the RX OPERATION menu appears again.
3
Using the one-touch dial keys or the
speed dial numbers, or by entering
the fax number using the 10-key pad,
specify a fax number, and then press
the [Yes] key.
The RX OPERATION menu appears again.
2
Note
An e-mail address can be specified as a forwarding location only when
the optional scanner unit SU-502 is installed.
For details, refer to the user manual for the scanner unit SU-502.