KTM 690 ENDURO EU - Manual (Page 114)

MAINTENANCE WORK ON CHASSIS AND ENGINE
112
100237-10
– Pull the Map‑Select switch and holder  upward off of the retaining bracket.
– Pull the Map‑Select switch out of the holder.
100238-10
– Turn the adjusting wheel until the desired digit is next to marking  .
Set the Map‑Select switch to Soft.
– Set the adjusting wheel to position 1.
Soft – reduced homologated peak performance for better driveability.
Set the Map‑Select switch to Advanced.
– Set the adjusting wheel to position 2.
Advanced – homologated performance with extremely direct responsiveness.
Set the Map‑Select switch to Standard.
– Set the adjusting wheel to position 3, 4, 5, 6, 7, 8 or 9.
Standard – homologated performance with balanced responsiveness.
Set the Map‑Select switch to poor fuel quality.
– Set the adjusting wheel to position 0.
Poor fuel quality – homologated performance is reduced in accordance with the
fuel quality, use for no more than 1 tank of fuel
– Position the Map‑Select switch in the holder.
– Slide the Map‑Select switch with the holder downward onto the retaining bracket.
– Mount the seat. (
P. 103)