Greasing and service table – KTM 690 ENDURO EU User Manual
Page 55
GREASING AND SERVICE TABLE
53
8GREASING AND SERVICE TABLE
8.1
Important maintenance work to be carried out by an authorized KTM workshop.
K10N
K50A
K100A
J1A
J2A
Engine
Change engine oil and oil filter, clean oil screens.
•
•
•
•
•
Check and adjust valve clearance.
x
•
•
Check engine mounting screws for tightness.
•
•
•
•
•
Replace spark plug.
•
Check engine bolts accessible from outside for tightness.
•
•
•
•
•
Fuel injection
Check connection boots for cracks and leakage.
x
•
•
•
Read out the error memory with a KTM diagnostic tool.
x
•
•
•
•
•
Check fuel hoses, SLS hoses and vent hoses for damage, correct fit-
ting and leaks.
x
•
•
•
•
•
Clean, check and grease the O-ring of the fuel hose connection.
x
•
•
•
•
Check the cable harness of the throttle valve body for damage and cor-
rect positioning.
x
•
•
•
Attachments
Check the cooling system for leakage.
•
•
•
•
•
Check the antifreeze and coolant level. (
•
•
•
•
•
Check the functioning of the radiator fan.
x
•
•
•
•
•
Check the exhaust system for leaks and correct fitting and check that
the exhaust holders are tight.
x
•
•
•
•
•
Check Bowden cables for damage, smooth operation, routing without
sharp bends and setting.
•
•
•
•
•
Check/correct the fluid level of the hydraulic clutch. (
•
•
•
•
Check air filter and change if necessary. Clean the air filter box.
x
•
•
•
•
Check cables for damage and routing without sharp bends.
x
•
•
•
•
•
Check the headlamp setting. (
•
•
•
•
•