KTM 690 ENDURO EU - Manual (Page 77)

MAINTENANCE WORK ON CHASSIS AND ENGINE
75
9.25
Adjusting chain guide x
100299-10
– Remove screws  and  . Take off the chain guide.
Conditions
Number of teeth: ≤ 44 teeth
– Insert nut
 in hole  . Position the chain guide.
– Mount and tighten screws  and  .
Specification
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Conditions
Number of teeth: ≥ 45 teeth
– Insert nut
 in hole  . Position the chain guide.
– Mount and tighten screws
 and  .
Specification
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
9.26
Checking brake discs
Warning
Danger of accidents Reduced braking due to worn brake discs.
– Worn brake discs should be replaced immediately in an authorized KTM workshop.