KTM 690 ENDURO EU - Manual (Page 134)

MAINTENANCE WORK ON CHASSIS AND ENGINE
132
9.74
Removing the engine guard
– Stand the motorcycle on its side stand on a horizontal surface.
100198-10
– Remove screws  on the left and right.
– Pull the engine guard forward out of the holders and set it down.
9.75
Installing the engine guard
100199-10
– Slide the engine guard into holders  at the rear.
– Position the engine guard. Mount and tighten screws.
Specification
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)