KTM 690 ENDURO EU - Manual (Page 33)

OPERATING ELEMENTS
31
700121-01
– Switch on the ignition by turning the ignition key in the position .
– Press the MODE button several times until the TRIP 1 display mode is active.
– Keep the SET button pressed.
The TRIP 1 display is at 0.0.
5.24
Combination instrument - setting/resetting TRIP 2 display
Info
The tripmaster TRIP 2 operates constantly and counts up to 999.9.
You can use the tripmaster to measure trips or the distance between refuelling stops. After reaching 999.9, the tripmaster begins
again at 0.0.
700122-01
– Switch on the ignition by turning the ignition key in the position .
– Press the MODE button several times until the TRIP 2 display mode is active.
– Keep the SET button pressed.
The TRIP 2 display is at 0.0.